Speedy Strips
Adjustable shelf-support strips that replace clips and pegs — fasten to cabinet sides with a staple gun, nails, or screws and reposition shelves in seconds.
Overview
Shelf HardwarePre-perforated strips that mount vertically inside cabinets, closets, and built-ins to carry adjustable shelves. Interlocking ends let sections join end-to-end for any cabinet height. No drilled peg holes, no proprietary parts — fasten with a regular staple gun, finish nails, or wood screws, then drop shelves in and slide them up or down without tools.
- Load50 lb / shelf
- Lengths18" or 24"
- ColorsWhite, Brown
- CutKnife or saw
- JoiningInterlocking
Variants
By Length × Color
18" Strip
| SKU | Color | Length |
|---|---|---|
| 218-W | White | 18" |
| 218-BR | Brown | 18" |
24" Strip
| SKU | Color | Length |
|---|---|---|
| 224-W | White | 24" |
| 224-BR | Brown | 24" |
Installation
No Special Tools| Step | Detail |
|---|---|
| 01 | Measure and cut. Trim strips to length with a utility knife or hand saw. Use the interlocking ends to join sections for runs longer than 24". |
| 02 | Align inside the cabinet. Position a strip vertically on each side wall — plumb, parallel front-to-back, and matched in height. Pre-punched holes locate every fastener. |
| 03 | Fasten. Drive through the supplied holes using any one of:
|
| 04 | Drop in shelves. Shelves rest directly on the strip tabs — no clips, pegs, or pins. Lift and reposition to any height in seconds. |
Specifications
Technical Data| Available lengths | 18" and 24" — interlocking ends combine for any total run |
| Load rating | 50 lb per shelf (strips installed in pairs, shelf fully seated) |
| Colors | White, Brown |
| Fastener options | Narrow-crown 3/4" staples · 3/4" nails · #4 × 3/4" wood screws |
| Staple pressure | 80 PSI |
| Field-cut method | Utility knife or hand saw |
| Replaces | Shelf clips, pegs, and drilled-hole shelf pins |
