Piano Hinges
Continuous steel hinges running the full length of a door or lid, distributing load evenly across the joint. Stocked in nickel and polished brass from 24″ to 72″.
¾″ Leaf Continuous Piano Hinge — ¾″ × ¾″ Open
SteelStandard-duty continuous hinge with a ¾″ open width per leaf. Ideal for cabinet doors, chest lids, and light-duty enclosures. Available in four lengths from 24″ to 72″ — cut to size on the job site with tin snips or a hacksaw.
| Finish | Length | SKU | ||
|---|---|---|---|---|
| PB | Polished Brass | 24″ | 15024-PB | |
| NI | Nickel | 30″ | 15030-NI | |
| PB | Polished Brass | 30″ | 15030-PB | |
| NI | Nickel | 48″ | 15048-NI | |
| PB | Polished Brass | 48″ | 15048-PB | |
| NI | Nickel | 72″ | 15072-NI | |
| PB | Polished Brass | 72″ | 15072-PB | |
1¼″ Leaf Continuous Piano Hinge — 1¼″ Open
SteelWider leaf for medium-duty applications — workbench tops, larger cabinet doors, and access panels. The 1¼″ open width per leaf provides more screw holes per length than the ¾″ series, improving pull-out resistance on heavier lids.
| Finish | Length | SKU | ||
|---|---|---|---|---|
| NI | Nickel | 72″ | 12572-NI | |
| PB | Polished Brass | 72″ | 12572-PB | |
2″ Leaf Heavy-Duty Continuous Piano Hinge — 2″ Open
SteelThe widest piano hinge in the line, built for heavy lids, counter flaps, and industrial enclosures where maximum knuckle strength matters. Each 2″ leaf carries more fastener holes and distributes weight across a broader bearing surface.
| Finish | Length | SKU | ||
|---|---|---|---|---|
| NI | Nickel | 72″ | 20072-NI | |
| PB | Polished Brass | 72″ | 20072-PB | |
